Factory source Polymer Type Anionic Polyacrylamide - PAM-Cationic Polyacrylamide – Cleanwater
Factory source Polymer Type Anionic Polyacrylamide - PAM-Cationic Polyacrylamide – Cleanwater Detail:
Description
This product is an environmental friendly chemical .It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid. It has two different forms, powder and emulsion.
Application Field
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater and life sewage water.
3. It can be used for paper making to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Other industries-sugar industry
Other industries-pharmaceutical industry
Other industries-construction industry
Other industries-aquaculture
Other industries-agriculture
Oil industry
Mining industry
Textile industry
Petroleum industry
Paper making industry
Advantage
Specifications
|
Item |
Cationic Polyacrylamide |
|
|
Appearance |
White Fine-Sand Shaped Powder |
Milky White Emulsion |
|
Molecular Weight |
6million-10million |
/ |
|
lonicity |
5-80 |
5-55 |
|
Viscosity |
/ |
4.5-7 |
|
Degree of Hydrolysis% |
/ |
/ |
|
Solid Content% |
≥90 |
35-40 |
|
Shelf Life |
12 Months |
6 Months |
|
Note: Our product can be made upon your special request. |
||
Application Method
Powder
1. It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2. When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60℃.
3. The most economical dosage is based on the trial.
Emulsion
When diluting the emulsion in water, it is supposed to stir quickly to make the polymer hydrogel in the emulsion sufficiently contact with water and rapidly disperse in water. The dissolution time is around 3-15 minutes.
Package and Storage
Emulsion
Package: 25L, 200L, 1000L plastic drum.
Storage: The storage temperature of the emulsion is perfectly between 0-35℃. The general emulsion is stored for 6 months. When the storage time is long, there will be a layer of oil deposited on the upper layer of the emulsion and it is normal. At this time, the oil phase should be returned to the emulsion by mechanical agitation, pump circulation, or nitrogen agitation. The performance of the emulsion will not be affected. The emulsion freezes at a lower temperature than water. The frozen emulsion can be used after it is melted, and its performance will not change significantly. However, it may be necessary to add some anti-phase surfactant to the water when it is diluted with water.It can be stored for 6 months. When the storage time is long, there will be a layer of oil deposited on the upper
Powder
Package: The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.
Storage: Should be sealed and stored in a dry and cool place below 35℃.
FAQ
1.How many kinds of PAM do you have?
According to the nature of ions, we have CPAM, APAM and NPAM.
2.How long can the PAM solution be stored?
We recommend that the prepared solution be used up on the same day.
3.How to use your PAM?
We suggest that when PAM is dissolved into a solution, put it into sewage for use, the effect is better than direct dosing
4.Is PAM organic or inorganic?
PAM is an organic polymer
5.What is the general content of PAM solution?
Neutral water is preferred, and PAM is generally used as a 0.1% to 0.2% solution. The final solution ratio and dosage are based on laboratory tests.
Product detail pictures:
Related Product Guide:
To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for Factory source Polymer Type Anionic Polyacrylamide - PAM-Cationic Polyacrylamide – Cleanwater , The product will supply to all over the world, such as: Peru, Sudan, Slovenia, Furthermore, all of our items are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our goods, please don't hesitate to contact us. We will do our best to meet your needs.
By Joa from Brunei - 2018.11.06 10:04
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Genevieve from Casablanca - 2018.06.21 17:11
